Raine Inc. - Police & SWAT Misc.

Showing Items 1 - 20

Fits Most Police Ticketbooks
Side Pocket Secures Citation Copies
Hard Writing Surface
Pen Holder

This Is A Complete Duty Rig Of Our Economy Duty Gear With The Following:
1) #049PL Large Equipment Belt
2) #008DD Flashlight Holder
3) #52RA3 Radio Holder
4) #050C Cuff Case
5) #0023 Key Holder
6) #047KS Baton Holder
7) #0047 Tear Gas Holder
8) #046D Double Magazine Pouch
9) #0048 Belt Keepers
10)#53AL Holster

Holds All Sizes Of Clipboards, Flashlights, Notebooks, Ticketbooks And Cards
Easy See-Through Mesh Pockets
Billy Stick/PR24 Holder
Adjusts To Any Seat
Fold Up And Carry Away!
Heavy-Duty Durable Black Nylon

• Carry Gear, Ammo And Your Side Arm Where You Want It And When You Need It
• M.O.L.L.E. Compatible
• Attach Your Equipment To This Vest And Wear Over The IBA So Heavy Gear Can Be Removed Easily When Not Required
• Easy To Put On When Needed
• Built With Heavy-Duty, Abrasion Resistant Nylon

**CLOSEOUT ITEM**
1)Field Proven Design Used In National Competitions
2)Durable Black Cordura Nylon
3)Has Many Tie-Down Points
4)Ample, Flexible Pocket Capacity
5)Adjustable And Fits Over Armor And Outerwear
6)The Top Four Pockets Have A Curved, Continuous Pull Zipper For Utra Quick Access. These Pockets Have Two Compartments To Hold Velco Mounted "Tear Out" Ammo Strips (072M) Or Any Gear For Easy Access Under Stress Conditions.
7)The Vest Also Has A Radio Case, MiniLight Holder, Flashlight Holder, Hammer Holder And Velcro Patches For The Attachment Of ID's Or Department Names

**CLOSEOUT ITEM**
Attaches To The Back Side Of The #0072 SWAT Vest
Holds Rappelling Equipment, Tools And Swiss Seat
Black Nylon

**CLOSEOUT ITEM **
This Is A Complete Set Including The Following
1) #0072 SWAT Vest
2) #072B Rappelling Gear Bag
3) #072G Gas Mask Bag
4) #072C Quick-Tie Cuff Case
5) #072M Velcro Mounted Ammo Strip

**CLOSEOUT ITEM**
Attaches To The #0072 SWAT Vest
Holds Quick-Tie Cuffs
Allows For Easy Access

**CLOSEOUT ITEM**
Attaches To The #0072 SWAT Vest
Holds Military Gas Mask
Ambidextrous Mounting
Double Pulls With Silencers
Black Cordura Nylon

**CLOSEOUT ITEM**
Fully Adjustable In All Directions To Attach To Any Vest Or Anything!
Durable Polypro Webbing

**CLOSEOUT ITEMS **
Attaches To The Inside Of The Quick Access Pockets Of The #0072 SWAT Vest
Holds Four Regular Magazines
Has A D-Ring Handle For A Quick "Tear Out" Of The Ammo Strip

**CLOSEOUT ITEM**
Attaches To The Inside Of The Quick Access Pockets Of The #0072 SWAT Vest
Holds Five Shotgun Shells
Has A D-Ring Handle For A Quick "Tear Out" Of The Ammo Strip

**CLOSEOUT ITEM**
Attaches To The Inside Of The Quick Access Pockets Of The #0072 SWAT Vest
Holds Three Oversized Or Stacked Magazines
Has A D-Ring Handle For A Quick "Tear Out" Of The Ammo Strip

“The Perfect Pouch”
• The Perfect SizeFor The Perfect Fit
• Holds First Aid Kit, Small Binoculars, Hand Held GPS And Many Other Items
• M.O.L.L.E. Or Belt Compatible Attachment
• Tough, Abrasive-Resistant Nylon
• Easy-Grab Pull Tab Works With Heavy Gloves
• Full Cover And Secure Velcro® Closure Protects Contents
• Size: 4”W x 5”H x 1”D

• Can Hold Hand-Held GPS, Chem Lights, Tourniquet, Compass, Strobe Light, Night Vision Scope, Multi-Tool Or Many Other Items
• M.O.L.L.E. Or Belt Compatible Attachment
• Tough Nylon
• Easy-Grab Pull Tab Works With Heavy Gloves
• Size: 2”W x 6”H x 1.5”W
• Full Cover And Secure Velcro® Closure Protects Contents
• Tough, Abrasive-Resistant Nylon

• Holds The Full PVS 14 Night Vision Assembly Or Many Other Items
• M.O.L.L.E. Or Belt Compatible Attachment
• Tough, Abrasive-Resistant Nylon
• Easy-Grab Pull Tab Works With Heavy Gloves
• Full Cover And Secure Velcro® Closure Protects Contents
• Grommet Drainage Hole
• Size: 5”W x 7”H x 1.5”D

• This Leg Worn M.O.L.L.E. Compatible Platform Will Help You Carry Extra Gear And Comfortably Balance Your Load
• Allows For An Added 120 Sq. Inch Capacity To The IBA Vest
• The Fully Adjustable Straps Can Be Attached To Your Belt Or To The IBA
• The Adjustable Web/Elastic Leg Straps Provide Comfort And A Stable Ride
• Built With Heavy-Duty, Abrasion Resistant Nylon And With Sturdy/ Comfortable Internal Foam

• Holds Surefire Z2 And 6P Lights
• Belt Or M.O.L.L.E. Mounting
• Reinforced Flap Prevents Accidental Activation Of Push Button Switch
• Load Light Head First To Allow For Easy Extraction
• Tough Abrasion Resistant Nylon

• Designed For The Baretta M-9 Sidearm And Similar Large Frame Automatics
• Used With Raine Inc. M.O.L.L.E. Leg Rig Platform Or Mount On The Belt
• The Retention Strap And Elastic Covered Quick Release Buckle Allows For A One Hand Release Or Closure
• Low IR Components
• Tensioning Screw Adjusts The Firmness Of The Fit For A Steadier Draw
• Padded Heavy Nylon
• Plastic Sight Protector
• Heavy Abrasive-Resistant Nylon With Reinforced Stitching
•Soft Padded Interior Protects The Weapon’s Finish

• Designed For The Baretta M-9 Sidearm And Similar Large Frame Automatics
• Mount Onto The IBA. The Forward Cant Allows For Easy Access
• The Retention Strap And Elastic Covered Quick Release Buckle Allows For A One Hand Release Or Closure
• Tensioning Screw Adjusts The Firmness Of The Fit For A Steadier Draw
• Padded Heavy Nylon
• Plastic Sight Protector
• Heavy Abrasive-Resistant Nylon With Reinforced Stitching
•Soft Padded Interior Protects The Weapon’s Finish